Allentown
41° F
Clear
Clear

6 electrical repairs you should never do yourself

Published On: Jan 24 2012 03:54:48 PM CST
Updated On: Sep 17 2013 11:38:25 AM CDT

By Philip Schmidt, Networx

What's the best way to prevent a life-threatening jolt? Calling an electrician, of course. If you don't like that plan, at least do whatever you can to avoid the following no-nos, and understand that this is NOT a complete list.

 

1. Mess with the service lugs in a breaker box

First of all, if you don't know what service lugs are, you shouldn't be doing anything in your breaker box (service panel) except resetting tripped breakers, if that. If you happen to know that the lugs are the big screw terminals or posts securing the service cables, you should also know that they're always hot (energized), even after you shut off the main breakers. Obviously, you should stay well away from the cigar-size cables connected to the lugs, too.

 

2. Work on the weatherhead

This is another one for the "don't even think of it" category. The weatherhead, also called the service mast or periscope, is the metal pole or other structure that connects the electrical service lines leading from the utility power pole to your house. Since this is part of your house, you might be tempted to upright the pole if it's leaning or tighten a bolt here and there. Can the thought of 200 amps coursing through your body convince you otherwise?

 

3. Do any wiring with the power on

If you're a reader of builders' magazines, you've certainly seen photos of someone doing something dangerous without the recommended protective gear, along with the caption: "Don't do what this guy's doing." (And more often than not, the "guy" happens to be the author.) The point is, just because electricians sometimes work with hot wires doesn't mean it's safe for you to do it. It's not safe for them, either.

 

4. Repair appliances

Appliances are safe as long as you turn off the power or pull the plug, right? Ever heard of a capacitor? It's a device that stores electricity to help boost the startup (and other functions) on some appliances, especially big ones like air conditioning units. Cutting the power to the appliance doesn't discharge the capacitors, but a metal tool touching the contacts surely will.

 

5. Tinker with electric (or hybrid) cars

Keep in mind that the electrical systems in both plug-in and hybrid cars aren't just complicated beyond your wildest nightmares, they're also extremely dangerous if you don't know what you're doing.

 

Source: http://www.networx.com/article/6-electrical-repairs-you-should-never-do

hometalklogo_250w